DMC TSC-35/RU User Manual

Scope of Delivery 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 9 Scope of Delivery ❏ Industrial LCD monitor KFM19_e (A o

Product Description Product Description The KFM19_e is an industrial LCD monitor designed for high-performance industrial applications. The solid ty

Product Description Front Panel The front plate of the KFM19_e is available alternatively as 19" front plate or in panelmount version. The 19&q

Product Description Display The built-in display is a 19" TFT SXGA display with a resolution of 1280 x 1024 and 300 cd/m2 of luminance (brightn

Product Description Controls and LED Indicator At the front plate are situated the control buttons of the On Screen Display (OSD), the “On/Off” butto

Product Description “On/Off” Button and Status LED “On/Off” Button Press this button, in order to switch on or off the monitor KFM19_e. Even if yo

Product Description Left Side The interfaces and the power plug (AC or DC) are located at the left side of the monitor. Fig. 5: KFM19_e Left side (

Product Description Interfaces The following interfaces with standard pin assignments are available: ❏ VGA (analog) input ❏ DVI-D (digital) input

Product Description S-Video Input The S-Video input is a 4 pin Mini DIN connector (female), and allows you to connect external analog signal sources

Product Description Rear Side At the rear side of the KFM19_e are the threaded studs (available only at panelmount front plate version) and the rubb

Contents 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 1 Contents Introduction...

Product Description Air Openings Behind the front plate, at the housings upper and bottom side are the air openings. Fig. 7: Air openings (top side

Product Description On Screen Display (OSD) Over the On Screen Display (OSD) can be installed the features, as OSD position and time, brightness, co

Product Description Power Supply The KFM19_e can be optionally equipped with an AC PSU or a DC PSU. The supply voltage range is indicated on the type

Product Description AC Connection AC-power plug Fig. 9: AC power plug 1. Connect the supplied AC power cord into the system AC power plug. 2. Con

Product Description DC Connection For the DC connection prepare the connecting wires using the supplied Phoenix plug terminal. The length of the DC

Product Description 4. Loosen the two slotted pan head screws of the DC plug terminal far enough so that you can insert the end of the power cord.

Installation Instructions Installation Instructions Please observe the described hints in the “Safety Instructions” chapter and the specification li

Installation Instructions Panelmount Version If you install the panel version of the KFM19_e into an instrument panel or other cabinets, use the ei

Monitor Connecting and Turning On Monitor Connecting and Turning On The industrial LCD monitor KFM19_e can be connected to IBM PC systems equipped w

Monitor Connecting and Turning On Touchscreen Software Installation The driver for Windows® 2000 / XP operating system for the touchscreen installat

Contents 2 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) Monitor Connecting and Turning On ...

Monitor Connecting and Turning On If you choose [DMC TSC-10 Series, Serial], the “Serial port” setting window appears. Choose the corresponding port

Monitor Connecting and Turning On Calibrating the Touchscreen After the installation of the touchscreen driver, you have to calibrate the touchscree

Monitor Connecting and Turning On You can adjust the calibration of the touchscreen by running the program at [Start] → [Program] → [UPDD] → [Contro

Maintenance and Prevention Maintenance and Prevention Kontron Embedded Computers systems only require minimal maintenance and care to keep them oper

Technical Data 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 33 Technical Data Diagonally (Size) active area 19” (376.0 x

Technical Data 34 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) Mechanical Specifications Dimensions Panelmount 19"

Technical Data 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 35 Environmental Specifications Operating Temperature 0 … +50

Technical Data 36 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) CE Directives and Standards CE Directives Low Voltage Dire

Technical Appendix – Interfaces Technical Appendix – Interfaces The following tables show the plug assignments for the external connections of the K

Technical Appendix – Interfaces DVI-D Connector Pin Signal Name Description DVI-D Connector (female) 1 TMDS2– Differential TMDS Data 2– 2 TMDS

Introduction 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 3 Introduction Kontron Embedded Computers would like to point ou

Technical Appendix – Interfaces S-Video Connector Pin Signal Name Description 4-pin Mini-DIN Connector (female) 1 GND Ground 2 GND Ground 3 Y Lu

Technical Appendix – Interfaces Serial Touchscreen Connector (RS232) Pin Signal Name 9-pin D-SUB Socket 1 DCD (Data Carrier Detect) 2 RXD (Recei

Technical Support 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 41 Technical Support For technical support, please contact

Technical Support Returning Defective Merchandise Before returning any merchandise, please: 1. Contact our Customer Service department to obtain an

Introduction Symbols used in this Manual Symbol Meaning This symbol indicates the danger of injury to the user or the risk of damage to the product

Important Instructions 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 5 Important Instructions This chapter contains instruc

Safety Instructions Safety Instructions Please read this section carefully and observe the instructions for your own safety and correct use of the

Safety Instructions 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) 7 ❏ Only devices and components which fulfill the requir

Safety Instructions 8 19" Industrial LCD Monitor KFM19_e – User’s Manual (Version 1.10) FCC Statement This equipment has been tested and found